Patented design. Premium quality. Built in USA.

Innovative features

The engineering inside every BeadBuster, tool by tool. Pick a model.

Every part has a job.

Start with the one idea the whole tool is built around, then tap any part to see what it does for you.

Clamping force

The Direction of Force Changes Everything.

BeadBuster applies force toward the clamping point. Typical knockoffs simply push downward.

Force Pushes Down
Typical knockoffForce Pushes DownVertical force makes it harder to maintain a secure grip.
Force Drives Into the Clamp
BeadBusterForce Drives Into the ClampSide-driven force helps hold the tool firmly against the rim.
4.2t At the clamp pad
9.0t Ram peak force
AISI 4140 Chrome-moly steel
USA Investment cast
BeadBuster XB-450i
Get a tool that won't crack

Cast like a jet engine part. Built to outlast you.

You get a Tool Body and Ram Foot made by Investment Casting, the same high-precision method used to make jet engine turbine blades.

Grab a tool that's one solid piece with no welds. Nothing to crack under pressure.

Engineers ran it through FEA (Finite Element Analysis) to strip weight without losing strength: you carry less, and it still takes the hit.

Squeeze it hard and it holds: AISI 4140 steel, hardened to HRC 30, rated for 130,000 psi minimum tensile strength.

Translation: one solid piece of aircraft-grade steel. There is no weld to crack.

Others: stamped and welded plate: the welds are the weak point.

Skip the hammer, every time

Pull the wrench. The bead pops. No hammer.

You get a Clamping Screw mounted in-line with the clamping direction: the patented design at the heart of this tool.

Every other screw-actuated tool mounts the screw sideways, so force "turns the corner" and mostly disappears. That's why those tools fight you to clamp all the way, and why you end up swinging a hammer.

Here, the screw pushes straight through: you get an incredible 4.2 tons at the Clamp Pad on the XB-450i. Clamp it with a wrench alone. No hammer, ever.

Translation: it clamps tight with a wrench alone, no hammering on the rim.

Others: perpendicular screws lose most of their force and usually need a hammer.

Protect your wheels while you work

Never scratch a rim again.

Clamp down without worry: an injection-molded HDPE Clamp Pad shields the rim as you break the bead. Run it on aluminum, magnesium, even carbon fiber wheels with zero scratching or scuffing. It holds up on steel wheels for years, too.

Translation: safe on your aluminum, magnesium, or carbon fiber wheels, not just steel.

Others: bare steel jaws that scuff and gouge expensive wheels.

Keep your threads alive for years

Crowned tips that save your threads.

Both custom screws have crowned, rounded tips, so when the metal naturally mushrooms from pushing hard on the Clamp Arm and Ram Foot, it never touches the Tool Body's threads. You keep smooth, working threads for years, not months.

Translation: years of heavy impact-wrench use won't ruin the threads.

Others: flat-tipped screws mushroom and chew up the threads over time.

Never fight a loose handle again

One-piece grip that never works loose.

Get a secure grip every time: the handle is cast right into the Tool Body, so you can drive the feet under the rim lip with full force and no slip.

Translation: the handle is part of the tool body, so it can never work loose.

Others: bolted-on or welded handles that loosen and twist.

Get an arm that never bends out of spec

Mild-steel muscle that holds its shape.

You grip the rim hard, job after job, without the arm ever giving out: it's AISI 1020 cold-rolled steel, a sturdy grade built for exactly this load.

Translation: the arm holds its shape job after job instead of bending out of spec.

Others: thin flat bar stock that bends the first time it is loaded hard.

Run it with your impact gun

Grade-8 screws built for impact wrenches.

You get custom 1/2"-13 UNC fully threaded bolts with 3/4" Flanged Hex Heads, sized so your socket never covers them, so you always see exactly how far you've traveled.

Both screws are Grade-8 steel: HRC 36 hardness, 150,000 psi minimum tensile strength. That means you can run your impact wrench on it without a second thought.

Translation: put your impact gun on it and go: the screws are built for it.

Others: standard bolts that round off, gall, or shear under an impact wrench.

Never worry about a snapped pin mid-job

Slotted for strength. Nothing left to snap.

You get a custom high-strength alloy Clevis Pin that barely does any work: slotted holes in the Tool Body let the Clamp Arm brace directly against the body, so the pin never takes the brunt of the force. Fewer parts under stress means one less thing to fail on you.

Translation: there's no pin to snap on you mid-job.

Others: a single hinge pin carries the load, and snaps.

Break a bolt, not the tool

9.0 tons of ram force you can't strip.

You get 1" of thread engagement (double the nominal 1/2" diameter), so the Ram delivers a peak force of 9.0 tons without stripping.

Keep the threads greased and you'll shear the Grade-8 bolt (~83 ft-lbs) long before you ever touch thread failure. That's the point: a $12 bolt breaks, not your tool.

Translation: the bolt breaks before the tool's threads ever do. A $12 bolt is a 5-minute fix, not a reason to buy a new tool.

Others: strip the threads and the whole tool is scrap.

Under the paint

XB-450i engineering details

9 features
01AISI 4140 · HRC 30

Investment cast construction

Tool body and ram foot are single-piece investment castings, 130,000 psi minimum tensile strength.

02AISI 4140 · HRC 30

Integrated handle

An ergonomic grip cast into the tool body for steady force while you press the sidewall.

03Up to 4.2 tons

Clamp direction

The patented in-line clamp screw puts its full force at the clamp pad.

04AISI 1020 cold rolled

Clamp arm

Stiff enough to grip the rim without flexing.

05Injection molded HDPE

Clamp pad

Protects aluminum, magnesium and carbon fiber rim finishes.

06Grade-8 · 150,000 psi

Custom screws

1/2"-13 UNC with 3/4" flanged hex heads, HRC 36. Rated for impact wrenches.

07AISI 4140 · HRC 30

Crowned tips

Rounded screw tips stop mushrooming from jamming the body threads.

08AISI 4140 · HRC 30

Clamp arm hinge pin slots

Slotted holes let the arm corner carry the clamping load, so the clevis pin barely works.

099.0 tons peak

Ram thread strength

1" of thread engagement, twice the bolt diameter. Bolt shear torque about 83 ft-lbs.

Work Less. Ride More.

Built in the USA and covered by a 3-year warranty.

US Patent US9333819B1